HIKVISION DS-7200 User Manual Download Page 142

Page: 142 / 227

User Manual of DS-7200/7300/8100 Series DVR

142

8.2

Setting Sensor Alarms

This section is available for DS-7224/7232, DS-7300, DS-8100 and HDVR models only.

Purpose:

You can set handling method of an external sensor alarm.

Steps:

Enter Alarm Settings interface and select an alarm input.

Menu> Configuration> Alarm

Figure 8. 7

Alarm Status Interface

Select

Alarm Input

tab to enter Alarm Input Settings interface and set the handling method of the

selected alarm input.

Check

checkbox to enable the alarm input and click

to set up its alarm response actions.

Figure 8. 8

Alarm Input Settings Interface

Select

Trigger Channel

tab and select one or more channels which will start to record or become

full-screen monitoring when an external alarm is input. Click

Apply

to save the settings.

Select

Arming Schedule

tab to set the channel’s arming schedule.

Choose one day of a week and up to eight time periods can be set within each day. Set up arming

schedule of other days of a week. You can also use

Copy

to copy an arming schedule to other days.

Click

Apply

to save the settings.

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands