HIKVISION DS-7200 User Manual Download Page 193

Page: 193 / 227

User Manual of DS-7200/7300/8100 Series DVR

193

10.6

Checking S.M.A.R.T. Information

Purpose:

The S.M.A.R.T.

(

Self-Monitoring, Analysis and Reporting Technology

)

is a monitoring system for HDD to detect

and report on various indicators of reliability in the hopes of anticipating failures.

Steps:

Enter the S.M.A.R.T. Settings interface.

Menu > Maintenance >HDD Detect >S.M.A.R.T. Settings

Select the HDD to view its S.M.A.R.T. information list.

If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the checkbox

before the

Continue to use this disk when self-evaluation is failed

item.

Three self-tests of S.M.A.R.T are provided, including Short Test, Expanded Test and Conveyance Test.

You can select a self-test type and click

to start self-test.

Figure 10. 19

S.M.A.R.T. Settings Interface

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands