HIKVISION DS-7200 User Manual Download Page 133

Page: 133 / 227

User Manual of DS-7200/7300/8100 Series DVR

133

Figure 7. 11

Export by Event Using USB Flash Drive

Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”.

Check backup result.

Choose the record file in Export interface and click button

to check it.

The Player player.exe will be exported automatically during record file export.

Figure 7. 12

Checkup of Event Export Result Using USB Flash Drive

7.1.4 Backing up Video Clips

Purpose:

You may also select video clips to export directly during Playback, using USB devices (USB flash drives,

USB HDDs, USB writer), SATA writer or eSATA HDD.

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands