HIKVISION DS-7200 User Manual Download Page 23

Page: 23 / 227

User Manual of DS-7200/7300/8100 Series DVR

1.3

USB Mouse Operation

A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this device. To use a USB

mouse:

Plug USB mouse into one of the USB interfaces on the front panel of the device.

The mouse should automatically be detected. If in a rare case that the mouse is not detected, the possible

reason may be that the two devices are not compatible, please refer to the recommended device list from

your provider.

The operation of the mouse:

Table 1.5

Description of the Mouse Control

Name

Action

Description

Left-Click

Single-Click

Live view: Select channel and show the quick set menu.

Menu: Select and enter.

Double-Click

Live view: Switch single-screen and multi-screen.

Click and Drag

PTZ control: pan, tilt and zoom.

Video tampering, privacy mask and motion detection: Select target

area.

Digital zoom-in: Drag and select target area.

Live view: Drag channel/time bar.

Right-Click

Single-Click

Live view: Show menu.

Menu: Exit current menu to upper level menu.

Scroll-Wheel

Scrolling up

Live view: Previous screen.

Right-click Menu: Previous item.

Scrolling down

Live view: Next screen.

Right-click Menu: Next item.

1.4

Input Method Description

Figure 1.5

Soft Keyboard

Description of the buttons on the soft keyboard:

Table 1.6

Description of the Soft Keyboard Icons

Icons

Description

Icons

Description

English

Capital English

Numbers

Symbols

Lowercase/Uppercase

Backspace

Space

Enter

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands