5
Enforcer V10 Programming Guide
THE ENGINEER MENU
The Engineer Menu must be accessed in order to program all system configurations.
Please note
1. All tamper alarms (including case tamper), will be disabled once in the Engineer Menu.
2. All personal attack and fire alarms will not cause an alarm in the Engineer Menu.
Accessing The Engineer Menu
Access to the Engineer Menu will be allowed if the Enforcer is unset. If set, the Enforcer must be unset first via a valid
user code/tag/keyfob in order to gain access. If the ‘Allow Engineer Menu’ function in the Master Manager Menu is
set as ‘No’, the message ‘Authorisation Required’ will be shown and access will be denied until this option is set as
‘Yes’.
1.
Enter the engineer code (default 1111).
2.
If any faults that are active, they will be displayed now on the screen. Press
A
and enter the engineer
code again.
3.
‘SET DATE & TIME’ is displayed.
4.
Engineers Menu has been accessed.
When the Engineer Menu is accessed, a high pitch tone is generated intermittently.
Please note: It is essential that a factory default (clean start) is performed after initial power up to
ensure that the correct defaults have been chosen.
Exiting The Engineer Menu
When a Main Menu Item (a menu that is in capital letters) is displayed, press
or scroll to ‘EXIT ENGINEERS MENU?’
and press
.
Useful Menu Options
Wireless device control
Learns and deletes all wireless inputs, bells and arming stations. To learn wireless keyfobs enter the Master Manager
menu and scroll to CHANGE CODES. (Refer to the user manual).
Change inputs
Programs all input types, attributes, areas and names and on the Enforcer.
Assign keypads and readers
Assigns wired/wireless keypads and readers, and enables readers for entry control.
Please note: Keypads and Readers must be addressed at the device and at the keypad.
