21
Enforcer V10 Programming Guide
Set Point In
Enter the areas that the arming station is located in.
Set Point Description
Enter a name and location for the arming station.
CHANGE TIMERS
This function controls all timers of the Enforcer.
Commonly used timers
For a list of all timers, refer to Appendix C. Most common programmed timers are:
Entry Time (0-255 seconds)
Confirm Time (1-99 minutes)
Exit Time (0-255 seconds)
Wireless Supervision (0-99 hrs)
Siren Time (2-15 minutes)
App Exit Time (0-199 seconds
Please note: The timer for inputs on ‘Soak Control’ is in the function ‘ENGINEER TESTS’.
Change Timers Programming
1.
Press
or
to scroll to ‘CHANGE TIMERS’. Press
.
2.
‘A Entry Time’ will be displayed. Enter the time and press
. Enter the time
on the required function and press
for the next timer.
3.
Press
to return to the Engineer Menu.
CODES AND USERS
This function changes the Engineer code, the Master Manager code and adds/changes/deletes any Duress or
Guard codes.
Default Codes
User: [None]
Master Manager: 2222
Engineer: 1111
Please note: User codes, fobs and keyfobs can only be changed in the Master Manager Menu. Please see
the user manual for more information.
5 Digit Pins?
If enabled, all new codes added to the system will require a minimum of 5 digits.
Please note: Any existing 4 digit codes will still be valid.
Delete Users And Fobs
This will delete all the key fobs and user codes from the system.
Please note: that this will not delete the Master Manager and the Engineer codes.
