28
Enforcer V10 Programming Guide
REVIEW LOGS
The control panel has two Event Logs, which are time and date stamped. The first log which is a panel log, records
all events that occur on the Enforcer, i.e. Users entering their codes to set or unset areas, alarm events, failures to
arm etc.
The second log which is an access log, only records access control events.
Panel Log
The Panel log records all events that occur on the Enforcer, i.e. Users entering their codes to set or unset areas, alarm
events, failures to set etc. Pressing
will give more information of the display (for example, shows which user
unset the Enforcer).
Access Log
The Access log records all events for Access Control events.
With each log, use the
key to move from one event to the previous event. The
key will move from one
event to the next event that occurred.
To view additional details, press the
key. If no other information is available, the display will move to the next
log entry. Pressing
will return to the main screen for that entry.
Please note: For all ‘Fault Codes’ please refer to Appendix E.
Reviewing Logs
1.
Press
or
to scroll to ‘REVIEW LOGS’. Press
.
2.
‘Panel log’ will be displayed. Press
to display the panel log.
3.
The time, date and event will be displayed. Use
[
or
]
to scroll through
the event log. If more information is required, for example, if ‘Alarm on Input’ is
displayed, press
to show more information (e.g. the input that activated).
Press
to exit the Panel log.
4.
‘Access log’ will be displayed. Press
to display the access log and
repeat the operations mentioned above. Press
to exit to the Engineer
menu.
ENGINEER TESTS
The test functions allow the engineer to test inputs, outputs, batteries and the siren.
Sounds To Play
This function previews all of the different tones the Enforcer system makes. They have a choice of: Chime, Chime
Follow, Exit, Exit Fault, Entry, Tech Fault, Tamper, Alarm, PA, and Fire.
