12
Enforcer V10 Programming Guide
Program Keyfob Buttons
1.
Press
or
to scroll to ‘WIRELESS DEVICE CONTROL’. Press
.
2.
‘Control Inputs’ will be displayed. Press
.
3.
‘Control Bells’ will be displayed. Press
.
4.
‘Control Arming Stations’ will be displayed, press
.
5.
‘Program Keyfob Buttons’ will be displayed. Press
.
6.
Press
[
or
]
to select the user (1-80) and press
.
7.
Press
[
or
]
to select the button to be programmed and press
.
8.
Press
[
or
]
to select the action of the button and press
.
9.
Select the area that the keyfob should be programmed in, press
.
Panic alarm (function option 6) must be allocated to two buttons
pressed together ( I + II recommended, button option 6) and can only be
programmed in the Engineer Menu.
Please note
1. Keyfobs are learnt in the Master Manager Menu under ‘EDIT USERS’.
2. Using the output types 170-199 (User Defined), outputs can be activated by the keyfob buttons. Refer
to ‘User Outputs’ function in the ‘CHANGE OUTPUTS’ menu.
Control Arming Stations
1.
Press
or
to scroll to ‘WIRELESS DEVICE CONTROL’. Press
.
2.
‘Control Inputs’ will be displayed. Press
.
3.
‘Control Bells’ will be displayed. Press
.
4.
‘Control Arming Stations’ will be displayed. Press
.
5.
‘Learn Devices’ will be displayed. Press
to learn an arming station or press
to access the delete menus (you can either delete individual devices or
delete all).
6.
Press
[
or
]
to select which keypad (1-4) to
learn and press
.
7.
Open the Arming Station and press and hold
the ‘LEARN’ button until all LEDs flash and then
release.
Please note
1. Once the green LED flashes, the learn process has been successful. If the red LED flashes, repeat the
process above as the learn procedure has not been successful.
2. Tags to control setting/unsetting are learnt in the Master Manager Menu under ‘EDIT USERS’.
