27
Enforcer V10 Programming Guide
System Displays Programming
1.
Press
or
to scroll to ‘SYSTEM DISPLAYS’. Press
.
2.
‘Area A Text’ will be displayed. Enter the text and press
. Repeat for all
areas.
3.
‘Sign on Message’ will be displayed. Enter the text and press
.
4.
‘Display When Set’ will be displayed. Press
[
or
]
to enable or disable the
function. Press
. Repeat for ‘Display Alarms’, ‘Display Hold Ups’, and ‘Display
Inputs’. Press
to return to the Engineer Menu.
Exit Modes
The ‘Exit Modes’ operate the setting procedure of the Enforcer system. The following ‘Exit Modes’ are available:
[0] Timed
The Enforcer system will set when the programmed ‘Exit Time’ has expired.
Please note: This is NOT suitable for systems installed to comply with BS8243.
[1] Final Door
The Enforcer system will set when an input programmed as ‘Final Exit’ is either closed (if the input was opened when
setting started) or it is opened and closed. ‘Final door’ is used for the ‘lock set’ operation; securing the lock completes
the setting procedure and unlocking starts the entry time.
[2] Timed/Final
The Enforcer system will set when a ‘Final Exit’ input has been closed, or when an ‘Exit Time’ has expired. The ‘Final
Exit’ input will override any ‘Exit Time’ programmed if opened/closed.
Please note: This is NOT suitable for systems installed to comply with BS8243.
[3] Push to Set (PTS)
The Enforcer system will only Set when a ‘Push to Set’ button has been pressed. This function will override the
programmed Exit Time.
Exit Modes Programming
1.
Press
or
to scroll to ‘EXIT MODES’. Press
.
2.
‘A Exit Mode’ will be displayed. Press
[
or
]
to select the Exit Mode and
press
. Repeat for all areas.
3.
Press
to return to the Engineer Menu.
