19
Enforcer V10 Programming Guide
Programming Keypads
1.
Press
or
to scroll to ‘ASSIGN KEYPADS/READERS’. Press
.
2.
Press
[
or
]
to select the address. Press
.
3.
‘Type’ will be displayed. Press
0
to select keypad. Press
4.
‘Set Point Sets’ will be displayed. Select the area(s). Press
. Set Point Unsets’
will be displayed. Select the area(s). Press
. ‘Set Point In’ will be displayed.
Select the area(s). Press
.
5.
‘Set Point Description’ will be displayed. Press
to enter the name and
location if required.
6.
‘Enter Name’ will be displayed. Enter the name of the keypad and press
.
7.
‘Enter Location’ will be displayed. Enter the location of the keypad and press
.
8.
Press
[
or
]
to select another device address to program (0-3) or press
the
key to return to the Engineer menu
Programming Readers
Set Point or Unset Only
1.
Press
or
to scroll to ‘ASSIGN KEYPADS/READERS’. Press
.
2.
Press
[
or
]
to select the address. Press
.
3.
‘Type’ will be displayed. Press
to select reader. Press
.
4.
‘Reader is’ will be displayed. Press
0
for ‘Set Point’ or press
for ‘Unset
Only’ Press
.
5.
‘Set Point Sets’ will be displayed. Select the area(s). Press
. Set Point Unsets’
will be displayed. Select the area(s). Press
. ‘Set Point In’ will be displayed.
Select the area(s). Press
.
6.
‘Set Point Description’ will be displayed. Press
to enter the name and
location if required.
7.
‘Enter Name’ will be displayed. Enter the name of the keypad and press
.
8.
‘Enter Location’ will be displayed. Enter the location of the keypad and press
.
9.
Press
[
or
]
to select another device address to program (0-3) or press
the
key to return to the Engineer menu.
