en
Rev. 03 / 02.2021
AB3200
62 / 88
Software description
-] Settings
PROG
T/°C
RCF
RPM
t/min
Sound/Bell = on
PROG
T/°C
RCF
RPM
t/min
Store Settings...
PROG
T/°C
RCF
RPM
t/min
-] Settings
PROG
T/°C
RCF
RPM
t/min
Sound/Bell error = on
PROG
T/°C
RCF
RPM
t/min
Store Settings...
PROG
T/°C
RCF
RPM
t/min
The acoustic signal can be activated or deactivated as follows:
1.
Change to the menu
‘Machine Menu
🠂
Settings’
2.
Press the
[PROG] key until the ‘Sound/Bell’ parameter is displayed.
3.
Set
‘on’ or ‘off’ using the [adjusting knob].
‘on’
Signal after ending the centrifugation run
activated.
‘off’
Signal after ending the centrifugation run
deactivated.
4.
Press the
[START] key to save the setting.
5.
[STOP/OPEN] key Press 1x
⇒
Back to the menu
‘Machine Menu’.
6.
[STOP/OPEN] key Press 1x
⇒
Back to the main display
7.3.5.2
Sound/Bell error
Further information on page 55
The acoustic signal sounds at a 2-second interval after a
malfunction occurs and at a 30-second interval after the
end of the centrifugation run and rotor standstill.
The acoustic signal is ended by opening the lid or pressing
any key.
The acoustic signal can be activated or deactivated as follows:
1.
Change to the menu
‘Machine Menu
🠂
Settings’
2.
Press the
[PROG] key until the ‘SOUND/BELL error’ parameter is dis-
played.
3.
Set
‘on’ or ‘off’ using the [adjusting knob].
‘on’
Signal after malfunction occurs activated.
‘off’
Signal after malfunction occurs deacti-
vated.
4.
Press the
[START] key to save the setting.
5.
[STOP/OPEN] key Press 1x
⇒
Back to the menu
‘Machine Menu’.
6.
[STOP/OPEN] key Press 1x
⇒
Back to the main display
