en
Rev. 03 / 02.2021
AB3200
10 / 88
Introduction
Foreseeable misuse
The device is built according to the state-of-the-art and the recognized
safety regulations. If used and handled improperly, there could be life-
threatening danger to the user or third parties, or the device could be
impaired or there could be other property damage. The device is only to be
used for its intended purpose and only when it is in safe working condition.
Malfunctions which could affect safety must be corrected immediately.
If consumable material approved/sold by the manufacturer is not used,
there is a danger of container damage at high speeds, which could result in
a spontaneously high unbalance and damage to the device.
Do not operate the device unsupervised.
If used improperly, incorrect input of the parameters can result in dangerous
operating conditions: For example, if the duration of a run is entered too
high, the sample could overheat, which could cause the sample container
to burst, which could result in extreme unbalance at high speed and
damage to the device.
1.6
Replacement parts/consumable material
Only original replacement parts and approved original accessories of the
manufacturer may be used and only original consumable material or that
recommended (approved) by the manufacturer in its official documentation
may be used.
WARNING
If original replacement parts, consumable material approved
or sold by the manufacturer and original accessories are not
used, any warranty or liability claims against the company
Andreas Hettich GmbH & Co. KG are void.
1.7
Scope of delivery
■
1x device
■
1 x mains cable (power supply)
■
1 x size 5 Allen wrench (for emergency release and mounting/
dismounting the rotor)
■
1 x lubricating grease for lifting lugs
■
1x Allen wrench, size 2.5
■
1 x Allen keys, short, size T20 SG
■
1 x operating instructions
Rotor(s) and the corresponding accessories are included in
delivery, depending on the order.
1.8
Return shipments
If the device or its accessories are sent to the manufacturer, this/these must
be decontaminated and cleaned before shipping in order to protect per-
sonnel, the environment and material. For returns, please contact Hettich or
the responsible Hettich sales partner. You will then receive a clearance cer-
