en
Rev. 03 / 02.2021
AB3200
58 / 88
Software description
HELP # = xxxx
PROG
T/°C
RCF
RPM
t/min
-] Info
PROG
T/°C
RCF
RPM
t/min
Zentrimix 380 R
PROG
T/°C
RCF
RPM
t/min
Mains Voltage : 230V
PROG
T/°C
RCF
RPM
t/min
Rotor 8*: Nmax= 2500 R=174
PROG
T/°C
RCF
RPM
t/min
7.
Press the
[START] key.
After calling up the help number, the previous PIN will
become invalid.
8.
Write down the help number and request the required PIN from the
manufacturer.
9.
Set a new PIN using the received PIN
10.
[STOP/OPEN] key Press 1x
⇒
Back to the menu
‘Change PIN’.
11.
[STOP/OPEN] key Press 1x
⇒
Back to the menu
‘Machine Menu’.
12.
[STOP/OPEN] key Press 1x
⇒
Back to the main display
7.3.3
Info
Further information on page 55
The following system information can be queried:
■
Device model
■
Mains voltage
■
Rotor information
■
Program version of the device
■
Frequency converter program version
The system information can be queried as follows:
1.
Change to the menu
‘Machine Menu
🠂
Info’
2.
Press the
[START] key.
🡆
The device model is displayed.
3.
Press the
[PROG] key.
🡆
The mains voltage is displayed.
4.
Press the
[PROG] key.
🡆
The rotor code (rotor), the maximum rotor speed (Nmax) and the
preset centrifuging radius (R) of the rotor last detected by the rotor
detection function are displayed.
The last detected rotor is marked with an asterisk
(
*
).
The information about the permissible rotors in the
device can now be displayed with the [adjusting
knob].
