29
EN
Spare parts list HLZ 45
Pos: Designation
Part Number
1
Control box, CM 168
10010.00028
2
Communication interface CI
10010.00026
3
Ignition unit, EBI
10026.00010
4
Mounting angle
10004.00239
5
Adjusting screw
10023.00022
6
Blast connection, cap
10014.00083
7
Blast connection tube, complete length 138.5 mm AV
10009.00020
Blast connection tube, complete length 108.5 mm AV
10009.00029
Blast connection tube, complete length 133.0 mm BV
10009.00045
8
Protective sleeve for pressure nipple
10014.00014
9
Pressure nipple
10008.00001
10
Air intake connector piece
10014.00045
11
O-ring for blower inlet (RG 148), optional*, Ø 70x3
10006.00071
12
Supporting ring air suction adaptor
10014.00044
13
O-ring air suction adaptor, Ø 63.09x3.5
10006.00091
13
O-ring for blower inlet (HRG 134), optional*
10006.00091
14
Silencer, housing
10014.00084
15
Silencer, insert
10044.00018
16
O-ring for silencer, Ø 120x4
10006.00069
17
Blower, HRG 134
10036.00005
18
O-ring for blower, Ø 54.0x3.0
10006.00063
19
Sealing ring
10004.00226
20
Blower, RG 148
10036.00006
21
Seal for blower
10006.00033
22
Burner, housing
10002.00069
23
Bush for ignition cable
10014.00070
24
O-ring for cover of blast connector, Ø 100x3
10006.00064
25
Cover of blast connector
10002.00077
26
O-ring for holder, fire eye, Ø 18x2
10006.00054
27
Holder for fire eye
10011.00015
28
Fire eye, KLC 2002, with filter
10011.00024
29
Position indicator, A
10014.00087
30
Holder for position indicator
10014.00004
31
Cover 1
10004.00210
32
Cover 2
10004.00237
33
Filter cartridge for oil pump
10019.00003
34
Oil pressure cable
10018.00025
35
Magnet coil, V1
10019.00002
36
Coupling
10016.00003
37
Motor, EB95C35 (50W), with capacitor including
3 cylinder head screws, DIN 912, M5x12 for pump
10016.00007
38
Capacitor, 3μF
10016.00005
39
Magnet coil, V2
10019.00007
40
Oil pump, BFP 52 L3
10019.00024
41
Sealing ring for oil hose
10017.00001
42
Joining nipple for oil hose (short bend)
10017.00003
43
Oil hose, 1,500mm, (short bend)
10020.00004
44
Knurled/thumb screw, DIN 464 M5x8
10023.00023
45
Measuring plate
10004.00274
46
Rubber bushing
10014.00022
47
Service holder
10004.00216
48
Offset screwdriver
10031.00001
49
O-ring for flange (Viton)
10006.00059
50
Unit flange AV
10002.00068
51
Joining nipple for oil pre-heater
10017.00004
52
Sealing ring for oil pre-heating nipple
10017.00005
53
Oil pre-heater, FPHB 5/PTC 50
10021.00005
54
Danfoss nozzle, 0.30 U gal./hr., 80° H
10007.00001
Danfoss nozzle, 0.35 U gal./hr., 80° H
10007.00002
Danfoss nozzle, 0.40 U gal./hr., 80° H
10007.00003
Danfoss nozzle, 0.45 U gal./hr., 80° H
10007.00004
Danfoss nozzle, 0.55 U gal./hr., 80° H
10007.00006
Danfoss nozzle, 0.60 U gal./hr., 80° H
10007.00007
Danfoss nozzle, 0.65 U gal./hr., 80° H
10007.00008
Danfoss nozzle, 0.75 U gal./hr., 80° H
10007.00033
Danfoss nozzle, 0.85 U gal./hr., 80° H
10007.00009
Danfoss nozzle, 1,00 Usgal/hr., 80° S
10007.00064
Danfoss nozzle, 1,10 Usgal/hr., 80° S
10007.00066
Danfoss nozzle, 1,25 Usgal/hr., 80° S
10007.00052
55
Spacer, 2.5 mm
10014.00003
56
Spacer, 1.0 mm
10014.00002
57
Set of initiating electrodes
10025.00055
58
Light tube AV
10015.00005
59
Holder for air nozzle AV
10015.00003
60
Proportioning ring AV
10015.00001
61
Mixing head, MB 817.5, complete
10015.00137
Mixing head, MB 819.0, complete
10015.00138
Mixing head, MB 822.0, complete
10015.00139
Mixing head, MB 824.0, complete
10015.00140
62
Air nozzle, MB 817.5
10015.00056
Air nozzle, MB 819.0
10015.00006
Air nozzle, MB 822.0
10015.00007
Air nozzle, MB 824.0
10015.00008
63
Sealing for burner tube
10006.00001
Pos: Designation
Part Number
64
Burner tube, unit, 125 mm long
10005.00002
Burner tube, unit, 95 mm long
10005.00007
65
Sealing for flange AV
10006.00072
66
Re-circulation tube, Ø 80x100x150 (AV 19, 22 and 24)
10005.00027
Re-circulation tube, Ø 80x80x160 (AV 17 only)
10005.00005
67
Recirculation tube, Ø 90x120x190 (BV only)
10005.00006
68
Sealing for flange BV
10005.00062
69
Burner tube, unit BV, 125 mm long
10005.00078
70
Sealing for burner tube BV
10006.00058
71
Dosing ring BV
10015.00052
73
Mixing head, MB 927, complete
10015.00146
Mixing head, MB 931, complete
10015.00147
74
Light tube
10005.00005
75
Set of ignition electrodes MBK
10025.00056
76
Unit flange BV
10002.00067
* if operated without intake air silencer
The following parts are not represented in the expanded view:
Designation
Part Number
Distance clamp for the dosing ring
10015.00055
Cable, ignition unit - initiating electrode with resistance
10013.00072
Cable, firing unit - communication
interface/blower HRG 134 (power supply)
10013.00088
Cable, firing unit - communication
interface/blower RG 148 (power supply)
10013.00110
Cable, firing unit - communication interface (eBus)
10013.00087
Cable, firing unit - flickering detector
10013.00089
Cable, firing unit - blower (drive)
10013.00086
Cable, firing unit - motor
10013.00083
Cable, firing unit - ignition unit
10013.00084
Cable, firing unit - solenoid valves
10013.00090
Cable, firing unit - oil pre-heater
10013.00085
Hexagon nut, DIN 934, M6, for burner housing
10023.00001
Hexagon nut, DIN 985, M8, for flange
10023.00002
Cylinder head screw with hexagon socket, DIN 912,
M5x12, for pump and blower
10023.00004
Cylinder head screw with hexagon socket, DIN 912,
M5x14, for cap of blast connector
10023.00055
Cylinder head screw with hexagon socket, SW 4,
similar to DIN 7984, M4x10, form motor and retainer of fire eye 10023.00016
Thread rolling screw, DIN 7500, CM4x40, for
communication interface and ignition unit
10023.00018
Thread rolling screw, DIN 7500, CM4x12, for ignition unit
10023.00090
Service screw, SW 4, similar to DIN 7984, M8x22
10023.00045
Flange screw SW 4 similar ISO 7380 M6x10 for burner tube
10023.00151
Cylinder head screw with hexagon socket,
DIN 912, M5x8 for service holder and angle bracket
10023.00038
Cylinder head screw with hexagon socket,
DIN 912, M4x100 for air intake silencer
10023.00087
Disk, DIN 440 6.6
10023.00084
Countersunk screw, DIN 923, M6x4x9.0 for flange
10023.00091
Cylinder head screw with hexagon socket,
DIN 912, M4x14 for retaining plate of initiating electrodes
10023.00047
Cylinder head screw with hexagon socket,
DIN 912, M4x6, for air nozzle
10023.00013
Cylinder head screw with hexagon socket,
DIN 912, M5x6, for holder of air nozzle
10023.00060
Protective plug
10014.00067
Burner-Chip-Card
on enquiry
Plotter (to connect the oil firing unit to a PC)
PC Interface CoCo PC mobile
10042.00013
Alternative spare parts for burner with ignition unit with fire eye
Pos: Designation
Part Number
Set of initiating electrodes AV
10025.00062
Set of initiating electrodes BV
10025.00063
Ignition unit with fire eye
10026.00007
Cable, ignition unit for firing unit with fire eye (supply)
10013.00093
Cable, ignition unit for firing unit with fire eye (evaluation) 10013.00094
Covers (top and bottom part)
10014.00141
Important:
Please only use
original Herrmann spare parts
, since otherwise the guarantee
is null and void (see guarantee conditions). When ordering spare parts, please
specify the name and order number of your burner.
We reserve the right to modifications that serve for technical advancement.