herrmann HL 60 ALV.2, Technical Information, Assembly And Operating Instructions

Page: 41 / 80

41
EN
10.6 Oil flow and operating hours counter
For the recording of the consumed fuel oil amount as well as the burner
operating time, we offer the installation of a combined oil flow and opera-
ting hours counter. The oil flow and operating hours counter can be
installed in the factory or using the conversion kit (order no. 10003.00019)
mentioned below.
It includes:
1 Oil meter display
10030.00005
2 Cable for firing unit - oil meter display 10013.00030
3 Cable for encoder - oil meter display 10013.00031
4 Cover hood for burner with oil meter 10001.00008
5 Oil pressure pipe, long 10018.00006
6 Straight plug end fitting 10017.00010
7 Sealing ring 10017.00007
8 Oil meter encoder 10030.00006
9 Swiveling screw fitting including sealing ring 10017.00009
10 Oil pressure pipe, short 10018.00007
1
2
3
4
5
6
7
8
9
10
10.7 Sealing plug for the return flow connection of the
pump
When converting the pump to a one-line operation, the return connection
must be sealed with a screw plug (order number: 100019.00006) and the
shift screw in the junction canal between the pressure and the intake side
must be removed (see chapter 3.5).
10.8 Service case
In order to have all required spare parts available for the on-site service
of the burner, we offer a service case individually tailored to each burner
model and your requirements.
For further information, please contact our customer service.
11. Customer service
For technical queries regarding the burner as well as for ordering spare
parts, please contact our customer service.
Herrmann GmbH u. Co. KG
Phone: 0049-7151-98928-0, Fax: 0049-7151-98928-49
Email: info@herrmann-burners.de
!
"
#
Burner pipe
Sliding flange
for burner
Retaining ring
Sliding flange S1
for boiler
O-ring
(additional
sealing)
Sealing for sliding flange
for boiler (standard sealing)