5
360093-1/H
Touring the incubator
2.2
Touring the chamber
A
B
C
D
E
F
G
C
A
E
F
B
D
E
B
A
C
D
H
I
F E
A
Left top: PC100i 115 V model. Right top: PC900i 230 V model. Left bottom: PC3200h 115 V
model. Right bottom: PC4200i model (with agitation system removed to show detail).
Label
Description
Function
A
Door switch
For PC4200 models: Controls power to the built-in
agitator. For all other models: Controls power to
the interior outlets.
B
Chamber fan
Circulates air in the chamber
C
Interior outlet
Provides power to agitators that are installed in the
incubator
D
I/O (input/output) connector
Interface with Helmer i.Series Flatbed Platelet
Agitators for motion information and alarms
E
Temperature control and chart
recorder probe
Collects temperature data from the top of the
chamber for temperature control. This probe is
also used for chamber temperature monitoring on
Horizon Series models, and to collect temperature
data for the chart recorder (if installed).
F
Temperature monitoring probe
(Applies to i.Series models only)
Collects temperature data from the chamber for
monitoring
G
Tube for alarm checks
(Applies to PC100 models only)
Holds liquid that is used during probe tests
H
Shelf, roll-out
(Applies to PC2200 and PC3200
models only)
Supports equipment that is installed inside
the incubator, such as Helmer Flatbed Platelet
Agitators
I
Lower probe
(Applies to PC3200i and
PC4200i models only)
Collects temperature data from the bottom of the
chamber for monitoring
