31
360093-1/H
Preparing the monitoring system on i.Series incubators
To change the setting for the temperature graph
1
Access the CONFIGURATION screen.
a
From the HOME screen, press the MAIN button. The MAIN screen appears.
b
Use the buttons to navigate to and select the Edit Configuration option. You are prompted to enter
your password.
c
Enter your password. If the password is correct, the CONFIGURATION screen appears with the
first option highlighted.
2
From the CONFIGURATION screen, use the buttons to navigate to and select the System Options
option. The SYSTEM OPTIONS screen appears with the Language setting highlighted.
3
Press the DOWN button until the Temperature Graph setting is highlighted.
4
Press the INC or DEC button until the new setting that you want to use appears.
5
Press BACK to return to the previous screen, or press HOME to return to the HOME screen. The
setting is saved.
4.6
Changing the password
NOTE:
A password is needed to complete this task.
You can change the password to prevent unauthorized changes to the settings. A password is not needed to
access other functions. The factory default password is 1234.
The password must have four digits. Each digit must be a number from 1 to 5. Your new password can be
the same as one used previously.
To change the password
1
Access the CONFIGURATION screen.
a
From the HOME screen, press the MAIN button. The MAIN screen appears.
b
Use the buttons to navigate to and select the Edit Configuration option. You are prompted to enter
your password.
c
Enter your password. If the password is correct, the CONFIGURATION screen appears with the
first option highlighted.
2
From the CONFIGURATION screen, use the buttons to navigate to and select the Change Password
option. You are prompted to enter a new password.
3
Using the buttons, enter your new password. You are prompted to enter your new password again.
4
Using the buttons, enter your new password again. One of the following occurs:
►
If the new password entries match, a message appears which states that your password has been
updated. After a brief pause, you are returned to the CONFIGURATION screen.
►
If the password entries do not match, the password is not changed. After a brief pause, during
which you are told that the password is incorrect, you are returned to the CONFIGURATION
screen. To change your password, you must repeat this procedure.
