32
360093-1/H
Platelet Incubator Operation Manual
4.7
Restoring factory defaults
NOTE:
A password is needed to complete this task. For more information about the
password, see Section 4.6, “Changing the password.”
You can change all the following settings at once to the default values set by the factory:
This setting
Is restored to this value
High Alarm Setpoint
24.0 °C
Low Alarm Setpoint
20.0 °C
Cond. Alarm Setpoint
50.0 °C
Door Ajar Timeout
3 minutes
Power Failure Timeout
3 minutes
Chart Paper Timer
6.5 days
Agitator 1 Setpoint
ON, 3 minutes
Agitator 2 Setpoint
ON, 3 minutes
Agitator 3 Setpoint
ON, 3 minutes
To restore factory default settings
1
Access the CONFIGURATION screen.
a
From the HOME screen, press the MAIN button. The MAIN screen appears.
b
Use the buttons to navigate to and select the Edit Configuration option. You are prompted to enter
your password.
c
Enter your password. If the password is correct, the CONFIGURATION screen appears with the
first option highlighted.
2
From the CONFIGURATION screen, use the buttons to navigate to and select the Factory Default
Settings option. The FACTORY DEFAULT SETTINGS screen appears.
3
Do one of the following:
►
If you want to change the settings to the factory defaults, press the ENTER button. You are
returned to the CONFIGURATION screen. Your settings are saved.
►
If you do not want to save the new value, press the BACK or HOME button to exit the FACTORY
DEFAULT SETTINGS screen.
