Health GEAR SleepZone C2 User Manual Download

Page: 33 / 60

User Manual

MK/YF38-07 – V2.01CS

Page 33 of 60

around 10 seconds. Depending

on the type of mask, accurate

detection of the mask being

removed may not always be

possible.

If “Auto off” function is turned off:

During use, the Machine will not

automatically stop the airflow

when the mask has been

removed.

Backlight

ON,15,30,45,60

If “Backlight” ON is selected, the

screen will stay on all the time.

Alternatively, the backlight can be

set to automatically turn off after

15, 30, 45 or 60 seconds.

Note: Regardless of the backlight

setting, the green power LED is

always illuminated, as long as

power is applied to the Machine.

Patient Mode

Clinician Mode

WIFI setting Off/on

This feature is not currently used.

When this function is set up and

connected, the device can

automatically connect via WIFI to

upload treatment data to a

remote server, so that medical

staff can learn about treatment

therapy use.

Patient Mode

Clinician Mode

Summary of Contents for SleepZone C2



























































Search results

Summary of Contents for SleepZone C2

Reviews:

Related manuals for SleepZone C2

Brands by name

Popular brands

Health GEAR SleepZone C2, User Manual

Search results

Summary of Contents for SleepZone C2

Reviews:

Related manuals for SleepZone C2

Brands by name

Popular brands