User Manual
MK/YF38-07 – V2.01CS
© 2019 All Rights Reserved
Page 52 of 60
11.2 Pneumatic schematic diagram
The pneumatic schematic diagram of the equipment is as follows:
11.3 EMC information
11.3.1 Instructions for use
The Sleep Apnea Therapy Devices referred to in this User Manual are are suitable for home
healthcare environments.
Warning
：
Don’t use near active HF surgical equipment and the RF shielded room of an ME
system for magnetic resonance imaging, where the intensity of EM disturbances is high.
Warning
：
Use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is necessary, this equipment
and the other equipment should be observed to verify that they are operating normally.
Warning:
Use of accessories, transducers and cables other than those specified or provided
by the manufacturer of this equipment could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and result in improper operation.
Warning
：
Portable RF communications equipment (including peripherals such as antenna
cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of
this equipment including cables specified by the manufacturer, otherwise, degradation of the
performance of this equipment could result.
The performance of these Sleep Apnea Therapy Devices that was determined to be “The
display works normally, device runs without trouble, and the pressure output is normal” and a
description of what the OPERATOR can expect if the ESSENTIAL PERFORMANCE is lost or
