manualshive.com logo in svg

Health GEAR SleepZone C2, User Manual, Page: 25 / 60

Share
Download
Health GEAR SleepZone C2 User Manual Download Page 25

 

User Manual 

MK/YF38-07 – V2.01CS 

 

 

© 2019 All Rights Reserved 

Page  25 of  60

(2) Status Bar 

The grey status bar in the upper part of the display is used to show symbols of features  that 

have been enabled and any alert messages.   

The symbols in status bar have following meanings: 

 

Comfort.

 This icon will appear when exhalation pressure relief comfort setting 

between 1 and 3 has been enabled and set. With this setting enabled, it will be easier to breath 

out against the airflow coming in. This can be helpful for some patients, especially those using 

nasal pillow masks. 

 

Heated Humidifier:

 This icon will appear when the heated humidifier has been   

enabled. The number relates to the level of humidification that has been set, from 1 (minimum 

moisture) to 5 (maximum moisture). The factory default setting is 2. Select the desired setting 

based on personal comfort and environmental conditions. 

The higher the number, the more moisture is added to the airflow treatment. Too much 

moisture will cause water droplets in the hose or mask.   

Tip:

 If the Machine is to be used without the humidifier, the humidifier setting must be set to 

OFF in the [Set] > [Param] menu. 

 

WIFI

: This icon will be displayed when the Machine has been successfully connected 

to a home WiFi network (2.4GHz only) in the [System] > [Network] menu.   

When this function is set up and activated, the equipment will be automatically connected with 

WIFI to upload the treatment data to a remote server so that the medical staff can learn about 

the Machine use state.

 

Tip: 

This feature is not currently used in Australia. 

 

 

Summary of Contents for SleepZone C2





























































Reviews:

No comments