manualshive.com logo in svg

Health GEAR SleepZone C2, User Manual, Page: 6 / 60

Share
Download
Health GEAR SleepZone C2 User Manual Download Page 6

 

User Manual 

MK/YF38-07 – V2.01CS 

 

 

© 2019 All Rights Reserved 

Page  6 of  60

Preface 

 

                                                is a registered trademark of CPAP Sales Pty Ltd (hereinafter CPAP 
Sales) 

Models C2 (CPAP) and C5 (AUTO) are Sleep Apnea Therapy Devices (Non-invasive 
ventilators) have been independently developed by Micomme Medical Technology 
Development Co., Ltd (hereinafter referred to as Micomme Medical) exclusively for CPAP 
Sales. 

Micomme Medical reserves all the rights to information contained in the document. Unless 
specially authorized by Micomme Medical in written form, nobody can copy any part of the 
document in any way or save it into any electronic information retrieval system. No unit, 
corporation or individual shall produce, sell or copy our products without being authorized by 
our company; or it shall be deemed as an infringement of our protected patents, and our 
company reserves the right to take any legal action against such infringement. 

   

No additional notice shall be provided in case of any change in the information contained in 
this document. Micomme Medical reserves the right to change equipment design, 
performance, components and processes including any other circumstances to continually 
improve product and quality assurance. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for SleepZone C2





























































Reviews:

No comments