User Manual
MK/YF38-07 – V2.01CS
© 2019 All Rights Reserved
Page 22 of 60
Chapter 4 Equipment use
Before starting treatment, please check the equipment and accessories to ensure they are
intact and free from any damage.
4.1 Pre-start inspection - Machine
After the CPAP Machine is properly connected with the power supply, its LCD will show the
main startup menu, where treatment parameters can be checked and set. In the event that the
CPAP Machine fails to display this menu after 2 seconds, please check all power connections
points. After the main menu appears, the [Treat] option should be highlighted, indicating the
CPAP Machine is ready for use.
4.2 Pre-start inspection - Mask
The CPAP Machine is designed to be used together with a CPAP mask. For further information
regarding the mask, please use the manual provided with the mask.
Please wear the face mask by following the steps below:
1. Connect the headband with the face mask (ensuring the headgear is correctly orientated);
2. Position the mask on the face;
3. Adjust the tightness of the headgear so that face mask is slightly pressing on the face
without causing any indentations;
4. The mask should be worn firmly but not uncomfortably to avoid leaks.
Attention!
If the Machine is not in proper working condition, sufficient fresh air cannot be
provided. In this case carbon dioxide can build within the mask and cause discomfort. When
applying the mask prior to sleep, please ensure the air flow starts correctly on the Machine.