manualshive.com logo in svg

Health GEAR SleepZone C2, User Manual, Page: 29 / 60

Share
Download
Health GEAR SleepZone C2 User Manual Download Page 29

 

User Manual 

MK/YF38-07 – V2.01CS 

 

 

© 2019 All Rights Reserved 

Page  29 of  60

4.7 Clinician mode 

Warning: non-professional staff are forbidden to access the Clinicians Mode

. 

4.7.1 Enter clinician mode 

(1) Power up the equipment, then move the cursor to display [Set] on the screen 

(2) Press and hold the control dial for 5 seconds until [Mode] is displayed 

(3) The clinician can now make setting adjustments 

 

4.7.2 Return to patient mode 

(1) Rotate the control dial until [Exit] shows on the screen, then press the control dial. Repeat 

this process until “Exit” can no longer be seen when rotating the control dial. 

 

4.7.3 Clinician menu 

 

Select ”Mode” to adjust treatment mode and treatment pressure.   

Select ”Param” to adjust additional including Ramp time and Ramp starting pressure. 

The range of available setting options will depend on the device model. C2 is for CPAP 

Machines, C5 is for Auto-CPAP Machines.

 

Summary of Contents for SleepZone C2





























































Reviews:

No comments