User Manual
MK/YF38-07 – V2.01CS
© 2019 All Rights Reserved
Page 18 of 60
Chapter 3 Installation and operation
3.1 Placement location
The CPAP Machine should be placed on a solid and flat table or fixed on support. The user
should operate the equipment in a position where it is easy to access the equipment and see
clearly the information displayed on it. A distance of at least 5cm should be kept between the
equipment and wall to ensure the equipment’s air inlet is not covered by curtains, quilts or
other objects. The air around the equipment should keep moving smoothly and away from any
heating or cooling device (such as forced vent, radiator, and air conditioning) to ensure the
system can work normally.
3.2 Set up
Your Machine will already have been pre-set by your equipment provider and should be ready
to use without any adjustments. A Quick Start Guide was supplied with this Machine to help you
get started.
3.2.1 Pre-assembly preparation
The Machine with humidifier are already assembled. No pre-assembly is required.
3.2.2 Connect power to the Machine
Fit the power cord and power supply together. Connect the mains plug to the AC wall socket and
the 24VDC plug into the back of the Machine.
Caution:
please ensure the power line is inserted firmly to prevent the power supply becoming
loose in case of equipment movement.
Attention!
Do not connect the device to any unauthorised devices unless recommended by
the manufacturer or your health care provider.
