Hatz 2G40 Operator'S Manual Download Page 54

Page: 54 / 94

Maintenance

2G40, 2G40 H

HATZ

Operator’s Manual

Procedure

Step

Activity

Check the intake opening (1) - depending on the version - for
coarse contamination such as leaves, heavy dust deposits,
etc., and clean if necessary.

Check the dust outlet opening (2) on the cyclone precleaner -
depending on the version - for free airflow and clean if neces-
sary (see chapter

8.2.6 Cleaning the oil bath air filter, page

Dry air filter

Overview

Intake opening for combustion air

Dust discharge valve

Air intake hose

Hose clamps

Procedure

Step

Activity

Check the intake opening (1) for coarse contamination such as
leaves, heavy dust deposits, etc., and clean if necessary.

Check that the dust discharge valve (2) is clear. Remove dust
seals by pressing them together.

Check the air intake hose (3) and hose clamps (4) for tightness
and good condition.

Summary of Contents for 2G40































































































Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands

Hatz 2G40, Operator'S Manual

Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands