Hatz 2G40 Operator'S Manual Download Page 70

Page: 70 / 94

Maintenance

2G40, 2G40 H

HATZ

Operator’s Manual

Wing nut

Cover

Dust discharge valve

Collar nut

Filter cartridge

Sealing lip

Guide apparatus

Filter housing

Procedure – Removing the air filter cartridge

Step

Activity

Take off and clean the rain cap (1).

Undo the wing nut (2) and remove the lid (3) with dust discharge
valve (4).

Check the lid and dust discharge valve for deformation, aging
and tears; replace if necessary.

Unscrew the collar nut (5).

Carefully pull out the filter cartridge (6).

Damage in the filter area (6) and in the area of the sealing lip (7)
preclude further use.

Pull the guide apparatus (8) out of the filter housing (9).

Clean all parts – excluding the filter cartridge. Ingress of dirt or
other foreign bodies into the intake opening of the engine must
be strictly avoided.

Procedure – Checking and cleaning the air filter cartridge

NOTICE

▪

The pressure must not exceed 5 bar.

▪

The filter cartridge may not be washed out or beaten out.

▪

Even minor damage in the areas of the sealing lip, filter pa-
per or filter cartridge makes it impossible to reuse the filter
cartridge.

Summary of Contents for 2G40































































































Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands

Hatz 2G40, Operator'S Manual

Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands