EPA CERTIFIED ENGINES
2G40, 2G40 H
86
HATZ
Operator’s Manual
Hatz reserves the right to modify, alter, and improve any engine or parts
without incurring any obligation to replace any engine or parts previously
sold with such modified, altered, or improved engine or parts.
EMISSION-RELATED INSTALLATION INSTRUCTIONS
“Failing to follow these instructions when installing a certified engine in a
piece of nonroad equipment violates federal law (40CFR1068.105(b)), sub-
ject to fines or other penalties as described in the Clean Air Act.”
“If you install the engine in a way that makes the engine's emission control
information labels hard to read during normal engine maintenance, you must
place duplicate labels on the equipment.”
EQUIPMENT-LABELLING REQUIREMENTS: FUEL LABEL (see chapter
)
The fuel label has to be permanently attached to the equipment.
In case of an engine mounted fuel tank, every engine is equipped with an
additional fuel label nearby the fuel inlet.
Otherwise, there are two loose fuel labels available with the engine.
If the original fuel label is not readily visible after the engine is installed in the
equipment then the second loose fuel label must be attached on the equip-
ment in such a manner that it is readily visible to an average person.
