Hatz 2G40 Operator'S Manual Download Page 56

Page: 56 / 94

Maintenance

2G40, 2G40 H

HATZ

Operator’s Manual

Procedure

Step

Activity

Check the intake opening (1) and cooling air outlet (2) for coarse
contamination such as leaves, heavy dust deposits, etc., and
clean if necessary (see chapter

8.2.8 Cleaning the cooling air

area, page 64

8.2.5

Change the engine oil and oil filter

This section contains the following subsections:

▪

Draining the engine oil

▪

Changing the oil filter

▪

Filling the engine oil

▪

Concluding the inspection work

Safety notes

CAUTION

Danger of burns.

When working on the engine there is a danger of burns from hot
oil.

▪

Wear personal protective equipment (gloves).

CAUTION

Danger of environmental damage from spilled used oil.

Used oil is water-polluting.

▪

Do no allow it to enter the ground water, water bodies, or
sewage system.

▪

Collect the used oil and dispose of it according to local envi-
ronmental regulations.

CAUTION

Danger of injury

Prolonged contact with engine oil can lead to irritation of the
skin.

▪

Wear safety gloves.

▪

If there is contact with the skin, thoroughly wash the af-
fected areas of the skin with soap and water.

Summary of Contents for 2G40































































































Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands

Hatz 2G40, Operator'S Manual

Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands