2G40, 2G40 H
Operation and use
HATZ
39
Operator’s Manual
NOTICE
i
▪
In case of irregularities, switch off the engine immediately.
▪
Identify the fault and eliminate it.
▪
For details of troubleshooting, see chapter
Automatic electrical shutoff (option)
The identifying feature of the electrical automatic shutoff is brief flashing of
all indicator lamps after the starting key is turned to position "I".
NOTICE
i
▪
If the engine stops again immediately after starting, or stops
independently during operation, this is an indication that a
monitoring element of the automatic shutoff has been acti-
vated.
▪
Remedy the fault before making further starting attempts
(see chapter
▪
Despite the automatic switch-off, check the oil level every
8–15 operating hours (see chapter
).
Procedure when faults occur
Step
Activity
1
Check the indicators (5-7).
After the engine comes to a standstill, the fault will continue to
be displayed by the indicator for approx. another 2 minutes.
2
Then the electrical equipment switches off automatically.
3
Set the starting key to position "0".
4
Turn the starting key back to position "I".
The fault display lights up again.
Remedy the fault before making further starting attempts (see
chapter
).
The indicator then goes out at the next start.
