Hatz 2G40 Operator'S Manual Download Page 52

Page: 52 / 94

Maintenance

2G40, 2G40 H

HATZ

Operator’s Manual

Symbol

Maintenance in-
terval

Maintenance step/check

Chapter

Every 8–15 oper-
ating hours or ev-
ery day before
starting

Check the oil level.

7.6 Check the oil

level, page 43

Check the intake area of the
combustion air.

Check the cooling air area.

8.2.4 Checking

the cooling air
area, page 55

Check the engine oil level is
correct in the bottom section of
the oil bath air filter.

7.6.2 Oil level in
the oil bath air fil-
ter (option), page
45

250h

Every 250 operat-
ing hours

Change the engine oil and oil
filter.

8.2.5 Change the

engine oil and oil

filter, page 56

Clean the oil bath air filter.

8.2.6 Cleaning

the oil bath air fil-

ter, page 60

Check and set the tappet
clearance.

Clean the cooling air area.

8.2.8 Cleaning

the cooling air
area, page 64

Check the screw connections.

8.2.9 Checking

the screw con-
nections, page

500h

Every 500 operat-
ing hours

Change the fuel filter.

8.2.10 Changing

the fuel filter,

page 67

Air filter service/dry air filter.

8.2.11 Maintain-

ing the dry air fil-

ter, page 69

Summary of Contents for 2G40































































































Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands

Hatz 2G40, Operator'S Manual

Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands