Hatz 2G40 Operator'S Manual Download Page 46

Page: 46 / 94

Operation and use

2G40, 2G40 H

HATZ

Operator’s Manual

7.7

Refueling

Safety notes

DANGER

Fire hazard from fuel.

Leaked or spilled fuel can ignite on hot engine parts and cause
serious burn injuries.

▪

Only refuel when the engine is switched off.

▪

Never refuel in the vicinity of open flames or sparks that can
cause ignition.

▪

Do not smoke.

▪

Do not spill fuel.

CAUTION

Danger of environmental damage from spilled fuel.

Do not overfill the fuel tank and do not spill fuel.

▪

Collect any leaking fuel and dispose of it according to local
environmental regulations.

CAUTION

Engine damage from using low quality fuel.

The use of fuel that does not meet the specifications can lead to
engine damage.

▪

Only use the fuel specified in chapter

4.5 Fuel, page 23

▪

The use of fuel that does not meet specifications requires
approval by Motorenfabrik HATZ (main plant).

Summary of Contents for 2G40































































































Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands

Hatz 2G40, Operator'S Manual

Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands