Hatz 2G40 Operator'S Manual Download Page 68

Page: 68 / 94

Maintenance

2G40, 2G40 H

HATZ

Operator’s Manual

CAUTION

Danger of environmental damage from spilled fuel.

When the filter is removed, a small amount of fuel is drained as
well.

▪

Collect any escaping fuel and dispose of it according to lo-
cal environmental regulations.

CAUTION

Dirt particles can damage the injection system.

▪

Maintain clean conditions to ensure dirt does not enter the
fuel line.

Overview

Fuel feed line

Fuel filter

Procedure

Step

Activity

Lock the fuel feed line

before and after the fuel filter

Place a suitable container under the fuel filter to collect emerg-
ing fuel.

Pull the fuel line (1) off the fuel filter (2) on both sides, and insert
a new filter.
Observe the flow-through direction (arrows).

Release the fuel feed, and pre-pump the fuel (see chapter

7.3.1

Pumping fuel with the manual lever, page 34

Check the fuel filter and lines for tightness after a brief trial run.

Summary of Contents for 2G40































































































Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands

Hatz 2G40, Operator'S Manual

Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands