Hatz 2G40 Operator'S Manual Download Page 65

Page: 65 / 94

2G40, 2G40 H

Maintenance

HATZ

Operator’s Manual

CAUTION

Danger of burns.

There is a danger of burns when working on a hot engine.

▪

Let the engine cool before maintenance.

CAUTION

Danger of injury.

When working with compressed air, foreign bodies may fly into
your eyes.

▪

Wear safety goggles.

▪

Never direct the compressed air jet toward people or toward
yourself.

CAUTION

Danger of damage to the machine from incorrect engine
cleaning.

▪

Let the engine fully cool down before cleaning.

▪

Do not spray components of the electrical equipment with a
water jet or high pressure jet during cleaning.

▪

Do not use gasoline or acid-based cleaning agents.

CAUTION

Damage from inadequate engine cooling.

Only operate the engine when all covers are installed.

NOTICE

In case of heavy contamination, shorten the maintenance inter-
vals accordingly (see chapter

8.2.2 Maintenance plan, page 51

Summary of Contents for 2G40































































































Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands

Hatz 2G40, Operator'S Manual

Search results

Summary of Contents for 2G40

Reviews:

Related manuals for 2G40

Brands by name

Popular brands