2G40, 2G40 H
Safety
HATZ
19
Operator’s Manual
NOTICE
▪
The necessary wiring diagrams are included with the ma-
chine if it is equipped with electrical equipment. Additional
wiring diagrams can be requested when needed.
▪
We cannot be held liable for electrical equipment that is not
designed according to HATZ wiring diagrams.
▪ Promptly replace faulty indicator lamps.
▪ Do not pull out the starting key during operation.
▪ Do not disconnect the battery while the machine is running. Resulting volt-
age peaks could destroy the electronic components.
▪ When cleaning, do no spray the electrical equipment components with a
water jet or high pressure cleaner.
▪ When performing welding work on the machine, disconnect the battery
and place the ground clamp of the welding equipment as close as possible
to the welding area. Disconnect the plug-in connection to the voltage regu-
lator.
3.3
Labels
Warning labels and information signs on the engine
Label
Meaning
2G40
= 1h
max
OIL
OIL
0,1 mm
0.004"
max
0000 040 096 02
500h
250h
Maintenance instructions (see chap-
ter
BIO
DIESEL
052 356 02
Refuel with diesel fuel only. For the
specification, see chapter
.
Do not use bio diesel.
0000 053 657 02
The engine may only be operated
with fuel that is "EXTREMELY LOW
IN SULFUR OR SULFUR-FREE".
The fuel label is located close to the
fuel cap. If there is no fuel tank in-
stalled on the engine, the label must
be applied permanently close to the
fuel filler opening.
