background image

 

ATTENTION

 

For the Rail Set with OT Splice,

 

this task should be performed by no fewer than two people.

For the Rail Set with OT Splice, make sure the Joint part is adequately supported during the
mounting process. 

 

Disassembly method of the Bracket 

 

 

Loosen the Bracket screw and 
rotate the Fastener to remove the 
bracket.

 

Cleaning

 

Be aware that direct contact with water, wiping the product with paint thinner or other 
solvent, or cleaning it with chemicals could cause malfunction, discoloration or distortion.

If the product becomes dirty, clean it by wiping with a clean, soft dry cloth.

Disposal of packing materials

 

Do not leave packing materials at the installation site.

Separate combustible cardboard from noncombustible waste.

Observe the local waste separation regulations when disposing of the materials.

Motorized Curtain Tracks

PROGRESS 50    Rail Set 

Thank you for purchasing TOSO products. To ensure safe use of this 
product, please read the following thoroughly and keep this manual 
stored.

 

Guide for Distributors and Installation Contractors

 

This manual contains information for a user to safely operate this product. 
Please provide this manual to a customer.

 

INDEX

 

Caution

Product view and part names

Cleaning

Disposal of Packing Materials

Installation and Disassembly Method

Instruction Manual

 

Summary of Contents for PROGRESS 50







Reviews: