ATTENTION
Installation and D
isassembly Method
Installation Dimensions & Diagram
Ceiling Single Attachment
Ceiling Double Attachment
<Window side>
For one Modular plate
For two Modular plate
<Window side>
Outlet with the ground
(Separate work)
900 mm or less
<Room side>
<Room side>
900 mm or less
Outlet with the ground
(Separate work)
Window
side
Window
side
Room
side
Room
side
Box width = Product length (L) + 10mm
Box width = Product length (L) + 10mm
Product length (L)
Product length (L)
Switch box for one switch box
(Separate work)
Switch box for one switch box
(Separate work)
Piping, wiring
(Separate work)
Piping, wiring
(Separate work)
Curtain box
(Separate work)
Curtain box
(Separate work)
Bracket Dimension
3-4.5x8 hole
How to assemble the Track (with OT Splice).
For the Rail Set with OT Splice, join the Track by the procedure described
below before fitting.
Loosen the OT Splice Screw and insert by sliding
along the Track groove.
Inset the Splice Pin into the opening of a Track.
(If insertion is difficult, tap with a wooden hammer
or similar tool.)
Inset the other Track into the OT Splice.
(If insertion is difficult, cover the Pulley with a cloth
and tap with a wooden hammer or similar tool.)
Position the Track so that the joint section is at the
center of the OT Splice, then tighten the screws of
the OT Splice.
①
②
③
④
Check to confirm that the OT Splice is securely attached to the Track.
Splice Pin
OT Splice
Track
