12
ZONE II REMOTE CONTROL FUNCTIONS
Zone II Remote Control Functions
A
Power Off
B
AVR Selector
C
AM/FM Tuner Select
D
Input Selectors
E
OSD Button
F
Navigation Controls
G
Numeric Keys
H
Disc Skip
I
Volume Up/Down
J
Blank Buttons
K
Mute
L
Clear Button
M
Direct Button
N
Memory Button
O
Tuner Mode Button
P
Transport Controls
Q
Set Button
The Bridge
/DMP Selector
NOTE:
The Zone II remote may be used in either
the same room where the AVR is located, or it
may be used in a separate room with an option-
al infrared sensor that is connected to the AVR’s
Multi IR
input jack
f
. When it is used in the
same room as the AVR, it will control the func-
tions of the AVR or any compatible
Harman Kardon products in that room. When it
is used in a separate room via a sensor connect-
ed to the
Multi IR
Jack
f
, the buttons for
power, input source, volume and mute will con-
trol the source and volume for the second zone,
as connected to the Multi Out Jacks
•
. (See
page 55 for complete information on using the
Multiroom system.)
The Zone II remote may be used in either the
same room where the AVR is located, or it may
be used in a separate room with an optional
infrared sensor that is connected to the AVR’s
Multi IR
input jack
.
We strongly recommend that the ZR 10 remote
be used for the initial configuration and setup
process for the AVR 745.
A
Power Off:
When used in the room where
the AVR is located, press this button to place the
unit in Standby. When it is used in a remote
room with a sensor that is connected to the
Multi IR
jack
, this button turns the Multi-
Room system off.
B
AVR Selector:
Press this button to turn on
the AVR. The input in use when the unit was last
on will be selected.
C
AM/FM Tuner Select:
Press this button to
select the Tuner as the input to the Multiroom
system. Press it again to change between the
AM and FM bands.
D
Input Selectors:
When the AVR is off,
press one of these buttons to turn the unit on
and to select a specific input. When the unit is
already in use, pressing one of these buttons will
change the input.
E
OSD Button:
Press this button to activate
the On Screen Display (OSD) system used to set
up or adjust the AVR’s parameters.
F
Navigation Controls:
Depending on the
menu or function in use, pressing these buttons
will navigate through menus, scroll through
option lists or configuration choices, or move the
cursor position. Press the left, right, up or down
button, as appropriate to the adjustment being
made.
K
O
N
M
L
Q
J
D
P
J
G
H
I
F
J
C
B
E
A
29510_AVR745_Engelsk 30/10/06 9:31 Side 12
