HALE SmartFOAM 1.7AHP, Description, Installation And Operation Manual

Page: 50 / 93

Page 49
SmartFOAM
ADT OPTION AIR CONNECTIONS
If the ADT option is used, install the operating switch and indicator light placard on the apparatus operator panel. A
mounting cutout diagram is provided (see Figure 31
: ADT Option Panel Placard Layout Dimensions ).
After mounting the placard assembly install the air hoses from the ADT to the placard assembly. Make sure proper
connections are made at the placard assembly (see Figure 32
: ADT Air Hose Connection, Part 1 ).
A color coded decal attached to the ADT valve assembly along with an optional color coded air hose harness simplifies air
hose connections. If the
optional air hose harness is not used, 1/4” (6mm) inside diameter air brake tubing can be
substituted. Make sure the air brake tubing selected has the proper DOT approval (see Figure 32 : ADT Air Hose
Connection, Part 1 and Figure 33 : ADT Option Air Hose Connections, Part 2 ).
When cutting the air harness or air brake tubing to size make sure the ends are square using a tubing cutter or razor
knife.
Figure 31 : ADT Option Panel Placard Layout
Dimensions
Figure 32 : ADT Air Hose Connection, Part 1