HALE SmartFOAM 1.7AHP, Description, Installation And Operation Manual

Page: 71 / 93

Page 70
SmartFOAM
SETTING PRESETS
The SmartFOAM controller allows the department to
configure up to six foam presets. Each preset allows for
a different foam concentrate rate and foam tank.
Enter the password “1023”. The controller will show the
preset to configure selection screen.
Figure 49 : Preset Configuration
Press the button next to the preset to configure (presets
1 through 6) and the display will show the preset’s
configuration screen.

Button 1 changes the color of the preset’s bar
(green, red, orange, purple, blue, or “DISABLED”).
o
“DISABLED” turns the preset OFF and it will not
visible on the preset screen.

Button 2 pops-up the onscreen keyboard so that the
preset’s text can be changed.

Button 3 toggles the preset’s foam tank (tank A or
B).

Button 5 increases the preset’s foam concentrate
percentage value.

Button 6 decreases the preset’s foam concentrate
percentage value.

Button 7 toggles the “remote activated” value (YES
or NO).
o
The SmartFOAM system can be remotely
activated / deactivated with an external switch.
When the system is remotely activated it will use
the foam concentrate percentage of the preset
which has set the “remote activated?” value to “YES”.
Only one preset is able to be selected for remote
activation.

The SAVE button
saves the preset’s configuration items to
memory.

The RETURN button moves back to the preset to configure
selection screen.
UNIT OF MEASURE
The SmartFOAM controller offers both English and Metric
readouts.
The Hale SmartFOAM system is calibrated at the factory to U.S.
measurement (English) units.
The unit of measure is changed within the USER menu. Enter
the password “1849” to go to the USER menu.
Figure 50 : User Menu
There are four items in the USER menu: language, unit of
measure, foam B color, and display format.
1.
Move the selection arrow next to the “unit of measure” box
by using the
“move selection arrow” UP/DOWN buttons.
2.
Use the “select next value” or “select previous value”
buttons to change the unit of measure (English or Metric).
3.
Press the “SAVE” button to save the selection to memory.
4. Press the MENU button to return to the main menu.