HALE SmartFOAM 1.7AHP, Description, Installation And Operation Manual

Page: 58 / 93

Page 57
SmartFOAM
Figure 40 : Side Mount Sensor Location Dimensions
Top Mount Installation
The top mount low level sensor assembly is available for installations where the sides or bottom of the foam tank are not
accessible or sensor service is required without draining the foam tank.
The sensor assembly is flange mounted in an access hole at the top of the foam tank. The two section telescoping
assembly permits adjustment of the low tank level sensor position for various foam tank depths from 31-
1/2” to 60”
(800mm to 1,524mm).
Flange cut-out dimensions are shown in Figure 41
: Top Mount Sensor Dimensions . The flange gasket can also be
used as a template to mark hole location.
Figure 41 : Top Mount Sensor Dimensions