HAKO Citymaster 1600, Operating Manual

Page: 47 / 222

02-1491-00-11.fm 47
Operation
2.3 Controls in the driver's cab
2.3.1 Steering column control panel
Adjusting the steering column
The steering column
Fig. 29
-
33
can be adjusted to the corresponding
driver position with a lever.
•
Turn the lever
Fig. 29-A
counter-clockwise until the steering column is
unlocked.
•
Set the required steering column adjustment.
•
Turn the lever clockwise until the steering column is locked.
Check that the steering column is locked. To do this, move the steering
wheel
Fig. 29-29
in the longitudinal direction.
Setting the fixed engine speed
The fixed engine speed and thus the system output of the vehicle in the
work mode is set with the button
Fig. 30-63
.
The overview illustrates that sufficient power is available already in the
ECO mode for many applications.
The full hydraulic output is reached as from the Standard speed.
Additional energy is available in the driving mode as well as in hydraulic
circuit II at Maximum. Set the speed corresponding to the requirements.
Operation primarily in the ECO mode lowers consumption and noise. See
pages 66 and 68 for information about setting the hydraulic circuits.
Horn
The horn is switched on and off with the button
Fig. 30-65
.
•
Push the button: Horn ON
•
Release the button: Horn OFF
Fig. 29:
A
33
29
Danger
Risk of accident! If the steering column
Fig. 29
-
33
is unlocked
while driving, it can come unexpectedly out of adjustment.
You can then lose control over the vehicle.
Fig. 30:
63 65
Stage Rpm Hydraulic circuit I
Litres/minute Hydraulic circuit II
Litres/minute
1-ECO 1600 50 20
2-STANDARD 2000 50/70 27
3-MAXIMUM 2400 50/70 32