HAKO Citymaster 1600, Operating Manual

Page: 62 / 222

62 02-1491-00-11.fm
Operation
2.4 Operating equipment of the vehicle
2.4.1 Auxiliary tool
The auxiliary tool
Fig. 50-24
is located on the driver's cab at the rear on
the right. This auxiliary tool has the following functions:
•
For mounting the suction mouth, see page 120.
•
For removing coarse dirt from the suction mouth and suction duct, see
page 144.
•
For cleaning the dirt hopper, e.g. if leaves clog up the sieves, see page
145.
•
As lever for the hand pump of the rear structure (optional). For raising
the dirt hopper/loading platform in the case of an engine failure.
•
For releasing the parking brake on the rear axle.
2.4.2 Ball cock circulating water
The circulating water is closed off only with the ball cock
Fig. 51-10
for
maintenance purposes. In normal operation the ball cock must be opened!
•
Circulating water supply opened: Ball cock in flow direction
•
Circulating water supply closed: Ball cock at right angles to the flow
direction
2.4.3 Front tool carrier
The front tool carrier
Fig. 52-12
is used for holding an attachment.
Fig. 50:
24
Fig. 51:
10
Note
Close off the circulating water supply only if there is circulating
water in the dirt hopper and the suction mouth should be
mounted or dismounted, see page 120.
Fig. 52:
12
A
B
C
Danger
Risk of accident! Front attachments not correctly fastened to
the front tool carrier can drop down while driving. Always
secure the front attachment with the locking devices
Fig. 52-A and B
.
Always secure non-Hako tools with the locking
device
Fig. 52-C
.