HAKO Citymaster 1600, Operating Manual

Page: 75 / 222

03-1491-00-11.fm 75
Operation
Starting the engine
Start the engine with the ignition switch
Fig. 72-78
.
•
Position 1: Preheat the engine until the control light
Fig. 72-A
goes out.
•
Position 2: Start the engine.
•
The ignition switch goes back into position 1.
Note the information on the ignition switch on page 55.
Releasing the parking brake
Press the switch
Fig. 72-77
. The parking brake is released again. With the
parking brake released the warning light
Fig. 71-A
goes out.
Starting transport mode
Slowly press down the accelerator pedal
Fig. 73-36
or
Fig. 73-37
for the
required direction and speed. The vehicle moves away. The correspond-
ing engine speed and the transport mode information symbol
Fig. 73-A
appear in the multifunctional display.
The speed in the transport mode is 0 to 40 km/h.
When the accelerator pedal is released (forwards or reverse) the vehicle
comes to a stop quickly because of the hydrostatic braking effect.
In forwards gear up to a speed of approx. 15 km/h the vehicle is in speed
level 1. The warning symbol
Fig. 73-B
appears in the multifunctional dis-
play.
If the temperature of the hydraulic oil is below 15 °C, the vehicle remains
in speed level 1 and the information symbol flashes.
Above a speed of approx. 20 km/h the vehicle is in speed level 2
Fig. 73-C
.
This can be delayed depending on the acceleration and the load. In this
case the information symbol flashes.
Fig. 72:
78
A
77
Fig. 73:
A
37
36
1 2
B C