HAKO Citymaster 1600, Operating Manual

Page: 63 / 222

02-1491-00-11.fm 63
Operation
Taking up and securing the front tool
1 Drive the vehicle up to the attachment and lower the front tool carrier
with the joystick
Fig. 53-70
.
2. Bring the locking hook
Fig. 53-A
into the rear position and the
lever
Fig. 53-B
into the upper position
(II)
. Pick up the chain
Fig. 53-C
and hook in onto the hook
Fig. 53-E
.
3. Drive under the take-up of the attachment and carefully raise the
attachment with the joystick
Fig. 53-70
. Raising the front tool carrier is
interrupted if the driver leaves the driver's seat.
4. Bring the locking hook into the front position and the lever into the lower
position
(I)
.
5. Adjusting the movement limiter of the front tool carrier:
•
For sweeping hook the chain
Fig. 53-C
onto the holder
Fig. 53-D
.
Observe the hooking point
Fig. 53-G
!
•
For attachments with floating position the chain must be hooked onto
the hook
Fig. 53-E
! (parking position)
6. Check the locking plate
Fig. 53-F
on the attachment. If necessary,
loosen the screws and shift the locking plate.
The position of the front tool carrier is shown in the multifunctional display.
•
Upper end position
Fig. 53-X1
•
Floating position
Fig. 53-X2
•
Lowered and fixed
Fig. 53-X3
II I
B
Fig. 53:
12
C
B
A
F
D
E
X1
G
X2 X3
70