HAKO Citymaster 1600, Operating Manual

Page: 174 / 222

174 06-1491-00-12.fm
Attachments and Options
Checklist – Sweeping
Driving to the work site
1. Bring the front sweeping machine into the transport position,
see page 162.
2. Start the vehicle with the ignition switch
Fig. 169-78
.
3. As required, switch on the dipped headlight
Fig. 169-54
, working
spotlight
Fig. 169-55
and beacon
Fig. 169-59
.
4. Drive to the work site in the transport mode. The front sweeping
machine must be in the upper end position for the transport mode.
Push the joystick
Fig. 170-70
back for this purpose.
Switching sweeping on
1. Switch on the work mode with the Hako button
Fig. 170-72
. The
accelerator pedals must be in the neutral position. The coupling triangle
work mode symbol appears in the multifunctional display Fig. 170
-A
.
2. Set the oil flow to 70 litres/min with the turn-push knob
Fig. 170-69
in
the configuration menu of the multifunctional display in the front tool
carrier menu item. In the working menu switch the hydraulic circuit I for
front attachments
Fig. 170-B
on and set it to maximum 70 litres/min.
3 Lower the front sweeping machine with the joystick
Fig. 170-70.
The
following functions are activated:
•
The front sweeping machine is lowered (floating position).
•
The sweeping drive is switched on.
•
The sweeping roller speed is activated.
No. Description Reference
1 Driving to the work site Page 174
2 Switching sweeping on Page 174
3 Setting the fixed engine speed Page 175
4 Starting sweeping Page 175
Fig. 169:
1
2
P
0
78
55
54
59
72
Fig. 170:
70
71
A
69
B