HAKO Citymaster 1600, Operating Manual

Page: 152 / 222

152 06-1491-00-12.fm
Attachments and Options
Inserting the safety strut
Raise the emptied dirt hopper with the button
Fig. 145-75
up into its end
position.
Hinge over the safety strut
Fig. 145-B
.
Lower the dirt hopper with the button
Fig. 145-75
and insert the safety
strut in the recess
Fig. 145-A
.
Checking the rotating brushes
Check the rotating brushes
Fig. 146-A
daily. Adjust the rotating brush
pressure as required, see page 153. If the rotating brush pressure is
changed, the sweeping level must be reset, see page 154.
Change worn out rotating brushes.
To do this, raise the sweeping unit with the joystick
Fig. 150-70
. Remove
the caps
Fig. 146-B
and loosen the nuts located below. Turn the rotating
brush counter-clockwise and push it downwards.
Checking the trailing rubber strap (3rd rotating brush)
Check the trailing rubber strap
Fig. 146-C
every 250 operating hours. If
required, replace the trailing rubber strap.
Fig. 145:
A B 75
Fig. 146:
B A