HAKO Citymaster 1600, Operating Manual

Page: 68 / 222

68 02-1491-00-11.fm
Operation
Output setting for hydraulic circuit II
The delivery of hydraulic circuit II is in the range between 0 and 32 l/min.
In the working menu, the hydraulic circuit II
Fig. 58-A
is activated and set
to the required value with the turn-push knob
Fig. 60-69
. Setting range:
OFF/ON or 0 to 100 %
When the vehicle is used with the sweeping unit and the dirt hopper, the
power range is set automatically with the coding plugs. The maximum
suction power is reached only at standard speed. Operation in the ECO
mode ensures noise and consumption-optimised operation of the sweep-
ing machine.
Fig. 60:
A
69
Danger
Risk of injury! Make sure that the attachments are suitable for
the set oil volume. An oil volume set too high can lead to inju-
ries due to a defect of the attachment!
Note
The hydraulic circuit II is switched off if the driver leaves the
driver's seat. Restarting by
Fig. 60-69
is also possible without
the operator on the driver's seat. The driver switches the
hydraulic circuit I back on with
Fig. 60-69
after returning to the
driver's seat. In connection with the sweeping unit and the dirt
hopper, hydraulic circuit II remains in operation even when
the driver's seat is left (operation of hand suction hose and
high-pressure cleaner possible).
Note
Note that attachments driven on hydraulic circuit II without the
presence of the operator at the workplace (driver's seat) can
possibly lead to danger to the operator and third parties.
Observe the safety instructions and danger warnings for the
corresponding attachment. Secure the vehicle by operating
the parking brake.