1-19
To do…
Use the command…
Remarks
Configure a password for the local
user
password
{
cipher
|
simple
}
password
Optional
Place the local user to the state of
active or blocked
state
{
active
|
block
}
Optional
When created, a local user
is in the state of active by
default, and the user can
request network services.
Set the maximum number of user
connections using the local user
account
access-limit max-user-number
Optional
By default, there is no limit
on the maximum number of
user connections using the
same local user account.
Specify the service types for the
local user
service-type
{
ftp
| {
ssh
|
telnet
|
terminal
} * }
Optional
By default, no service is
authorized to a local user.
Configure the binding attributes for
the local user
bind-attribute
{
call-number
call-number
[ :
subcall-number
] |
ip
ip-address
|
location
port
slot-number subslot-number
port-number
|
mac
mac-address
|
vlan vlan-id
} *
Optional
By default, no binding
attribute is configured for a
local user.
Configure the authorization
attributes for the local user
authorization-attribute
{
acl
acl-number
|
callback-number
callback-number
|
idle-cut
minute
|
level
level
|
user-profile
profile-name
|
vlan
vlan-id
|
work-directory
directory-name
} *
Optional
By default, no authorization
attribute is configured for a
local user.
Set the expiration time of the local
user
expiration-date time
Optional
Not set by default
Specify the user group for the local
user
group
group-name
Optional
By default, a local user
belongs to the default user
group
system
.
Note that:
z
With the
local-user password-display-mode
cipher-force
command configured, a local user
password is always displayed in cipher text, regardless of the configuration of the
password
command. In this case, if you use the
save
command to save the configuration, all existing local
user passwords will still be displayed in cipher text after the device restarts, even if you restore the
display mode to
auto
.
z
The
access-limit
command configured for a local user takes effect only when local accounting is
used.
z
Local authentication checks the service types of a local user. If the service types are not available,
the user cannot pass authentication.
