1-38
Figure 1-9
Configure AAA for SSH users by a RADIUS server
Configuration procedure
1) Configure the RADIUS server. ( iMC )
This example assumes that the RADIUS server runs iMC PLAT 3.20-R2602 or iMC UAM 3.60-E6102.
# Add an access device.
Log into the iMC management platform, select the
Service
tab, and select
Access Service
>
Service
Configuration
from the navigation tree to enter the
Service Configuration
page. Then, click
Add
to
enter the
Add Access Device
window and perform the following configurations:
z
Set both the shared keys for authentication and accounting packets to
expert
z
Specify the ports for authentication and accounting as 1812 and 1813 respectively
z
Select
Device Management Service
as the service type
z
Select
H3C
as the access device type
z
Select the access device from the device list or manually add the device with the IP address of
10.1.1.2
z
Click
OK
to finish the operation
